Approx. Rs 2,500 / Set Get Latest Price
Product BrochureMinimum Order Quantity | 08 Set |
Brand | 16'' (400 MM) |
Fan Weight | 4.0 Kilos (approx.) |
Floor Area Covered | 500 Sq. Ft. (appx.) |
Material Options | Aluminium & Stainless Steel (S.S.) |
Max Exhaust Capacity | 2700 C.F.M. |
Revolution Mechanism | Double Jet Sealed Ball Bearings |
Standard Sizes | Throat Dia- 21'' (500 MM) & 24'' (600 MM) |
MOC Of Fins | Aluminium (AL.) or Stainless Steel (S.S.) |
MOC Of Internal Fittings | Galvanized Iron (G.I.) or Stainless Steel (S.S.) |
MOC Of Top Cover and Bottom Ring | Stainless Steel (S.S.) |
Our RHINOTUFF Wind Turbine Ventilators is a natural air ventilation system, which helps create a healthy & congenial working environment by helping improve the air circulation in the place of installation.
It is a free spinning roof ventilator, which works by utilizing the Velocity Energy of wind to induce air flow through Centrifugal Action.
The Fan starts revolving due to the force of the outside wind & the inside hot air. The Centrifugal Force (backward thrust) caused by the spinning vanes creates a region of low pressure, which draws and throws out air from below and causes fresh cool air from the outside to come in.
The slightest breeze will cause the Turbo Ventilators to spin. Even after the breeze has stopped, the fly wheel effect of the rotor cage will used its stored energy to continuously remove stale air, gases, fumes & smoke giving rise to ventilation. Suction is maintained at very low levels of wind velocity.
Convective thermal currents are given boost by venture dome to further enhance revolution of the Ventilator.
Cooler air from the outside will rush into the negative space in the building to maintain a condition of equilibrium. Stale hot air is always exhausted through the Fan, whereas fresh air only comes in through the openings in the building. The incoming outside air could be filtered by installing filters over the inlets. This is necessary in case of pharmaceutical & food processing industries.
Their maximum exhaust capacity is 2700 C.F.M. It depends on the following three factors:
1. Wind velocity
2. Difference between the inside and outside temperature
3. The height at which the Ventilators are installed
Standard sizes are - 24', 22' & 21'
Options w.r.t. to M.O.C. of Fans - Aluminium (AL.), Stainless Steel (S.S.) or a combination of Polypropylene (PP) & Stainless Steel (S.S.)
Options w.r.t. to M.O.C. of Base Frames: Fiberglass (F.R.P.), Polycarbonate (PC), Aluminium (AL.) & Stainless Steel (S.S.)
Features:
Applications:
Approx. Rs 2,700 / Set Get Latest Price
Product BrochureMinimum Order Quantity | 08 Set |
Brand | Rhino Tuff |
Fan Weight | 4.0 Kilos (approx.) |
Floor Area Covered | 500 Sq. Ft. (appx.) |
Fan Height | 16'' (400 MM) |
MOC Of Fins | Aluminium (AL.) or Stainless Steel (S.S.) |
MOC Of Internal Fittings | Galvanized Iron (G.I.) or Stainless Steel (S.S.) |
MOC Of Top Cover and Bottom Ring | Stainless Steel (SS) |
Material Of Base Plates | Aluminium (AL.) & Stainless Steel (S.S.) |
Material Options | Aluminium (AL.) or Stainless Steel (S.S) |
Max Exhaust Capacity | 2700 CFM |
Revolution Mechanism | Double Jet Sealed Ball Bearings |
Standard Size | Throat Dia- 21'' (500 MM) & 24'' (600 MM) |
Approx. Rs 2,500 / Set Get Latest Price
Product BrochureMinimum Order Quantity | 08 Set |
Height | 16'' (400 MM) |
Standard Sizes | Throat Dia- 21'' (500 MM) & 24'' (600 MM) |
Fan Weight | 4.0 Kilos (approx.) |
Floor Area Covered | 500 Sq. Ft. (appx) |
MOC Of Internal Fittings | Aluminium (AL.) or Stainless Steel (S.S.) |
MOC Of Top Cover and Bottom Ring | Stainless Steel (S.S.) |
Material Options | Aluminium (AL.) & Stainless Steel (S.S.) |
Material of Base Plates | F.R.P. or PC. |
Max Exhaust Capacity | 2700 C.F.M. |
*Your information is safe with us.
Approx. Rs 2,700 / Set Get Latest Price
Product BrochureMinimum Order Quantity | 08 Set |
Weight | 4 Kilos (appx) |
MOC Of Top Cover and Bottom Ring | Stainless Steel |
Material Of Base Plates | FRP & PC ( For fixing of Fans) |
Material Options | Aluminium & Stainless Steel |
Floor Area Covered | 500 Sq. Ft. |
MOC Of Fins | Aluminium or Stainless Steel |
Maximum Exhaust Capacity | 2700 C.F.M |
Revolution Mechanism | Double Jet Sealed Ball Bearings |
Our Rhino Tuff Ventilators is a natural ventilation system, which helps create a healthy & congenial working environment by helping remove inside hot stale air & by facilitating entrance of outside fresh air.
It is a free spinning roof ventilator, which works by utilizing the velocity energy of wind to induce air flow through centrifugal action.
The Fan starts revolving due to the force of the outside breeze & the inside hot air. The centrifugal force (backward thrust) caused by the spinning vanes creates a region of low pressure, which draws and throws out air from below and causes fresh cool air from the outside to come in.
The slightest breeze will cause the Turbo Ventilators to spin. Even after the breeze has stopped, the fly wheel effect of the rotor cage will used its stored energy to continuously remove stale air, gases, fumes & smoke giving rise to ventilation. Suction is maintained at very low levels of wind velocity.
Convective thermal currents are given boost by venture dome to further enhance revolution of the Ventilator.
Cooler air from the outside will rush into the negative space in the building to maintain a condition of equilibrium. Stale hot air is always exhausted through the Fan, whereas fresh air only comes in through the openings in the building. The incoming outside air could be filtered by installing filters over the inlets. This is necessary in case of pharmaceutical & food processing industries.
Salient Features:
Applications:
Approx. Rs 2,700 / Set Get Latest Price
Product BrochureMinimum Order Quantity | 08 Set |
Brand | Rhino Tuff |
Weight | 4.0 Kilos (appx.) |
Floor Area Covered | 500 Sq. Ft |
MOC Of Internal Fittings | Galvanized Iron (G.I.) |
Maximum Exhaust Capacity | 2700 C.F.M. |
MOC Of Top Cover and Bottom Ring | Stainless Steel (S.S.) |
Standard Sizes | Throat Dia- 21'' (500 MM) & 24'' (600 MM) |
MOC Of Base Plates | F.R.P. or PC |
Revolution Mechanism | Double Jet Sealed Ball Bearings |
MOC Of Fins | Aluminium (AL.) or Stainless Steel (S.S.) |
Height | 16'' (400 MM) |
Available Material | Aluminium & Stainless Steel |
Our Rhino Tuff Ventilators is a natural ventilation system, which helps create a healthy & congenial working environment by helping remove inside hot stale air & by facilitating entrance of outside fresh air. It is a free spinning roof ventilator, which works by utilizing the velocity energy of wind to induce air flow through centrifugal action.
The Fan starts revolving due to the force of the outside breeze & the inside hot air. The centrifugal force (backward thrust) caused by the spinning vanes creates a region of low pressure, which draws and throws out air from below and causes fresh cool air from the outside to come in.
The slightest breeze will cause the Turbo Ventilators to spin. Even after the breeze has stopped, the fly wheel effect of the rotor cage will used its stored energy to continuously remove stale air, gases, fumes & smoke giving rise to ventilation. Suction is maintained at very low levels of wind velocity.
Convective thermal currents are given boost by venture dome to further enhance revolution of the Ventilator.
Cooler air from the outside will rush into the negative space in the building to maintain a condition of equilibrium. Stale hot air is always exhausted through the Fan, whereas fresh air only comes in through the openings in the building. The incoming outside air could be filtered by installing filters over the inlets. This is necessary in case of pharmaceutical & food processing industries.
Salient Features:
Applications:
Approx. Rs 2,500 / Set Get Latest Price
Product BrochureMinimum Order Quantity | 8 Set |
Height | 16'' |
Weight | 4 Kilos (appx.) |
Floor Area Covered | 500 Sq. Ft. |
Base Plates Available | FRP & PC |
MOC of Top Cover and Bottom Ring | Stainless Steel |
MOC of Fins | Aluminium or Stainless Steel |
Revolution Mechanism | Double Jet Sealed Ball Bearings |
Maximum Exhaust Capacity | 2700 C.F.M. |
Standard Size | Throat Dia- 21'' (500 MM) & 24'' (600 MM) |
Material Options | Aluminium & Stainless Steel |
Benefits of Use:
1. Provides natural ventilation and illumination
2. Reduces inside temperature
3. Creates a congenial work environment
4. Improves labour productivity
5. Reduces the cost of upkeep of buildings
6. Increases the building’s life span
7. Economical to use
8. Environment friendly
9. Entitled to depreciation at an accelerated rate
10. Short pay-back period
Applications:
*Your information is safe with us.
Approx. Rs 2,500 / Set Get Latest Price
Product BrochureMinimum Order Quantity | 08 Set |
Brand | Rhino Tuff |
Standard Sizes | Throat Dia- 21'' (500 MM) or 24'' (600 MM) |
Maximum Exhaust Capacity | 2700 C.F.M. |
MOC Of Top Cover and Bottom Ring | Stainless Steel (S.S.) |
MOC Of Internal Fittings | Galvanized Iron (G.I.) |
Fan Weight | 4.0 Kilos appx. |
Material Of Base Plates | F.R.P. or PC |
Height | 16'' (400 MM) |
Floor Area Covered | 500 Sq. Ft. (appx.) |
MOC Of Fins | Aluminium (AL.) or Stainless Steel (S.S.) |
Revolution Mechanism | Double Jet Sealed Ball Bearings |
Material Options | Aluminium or Stainless Steel |
Our RHINOTUFF Brand of F.R.P. Turbo Ventilator is a natural air ventilation system, which works on wind and temperature and pressure difference.
It helps create a healthy, congenial and productive work environment by helping remove inside hot stale air & by facilitating entrance of outside fresh air.
It is a free spinning roof ventilator, which works by utilizing the velocity energy of wind to induce air flow through Centrifugal Action.
The Fan starts revolving due to the force of the outside breeze & the inside hot stale air. The Centrifugal Force (backward thrust) caused by the spinning vanes creates a region of low pressure, which draws and throws out air from below and causes fresh cool air from the outside to come in.
The slightest breeze will cause the Turbo Ventilators to spin. Even after the breeze has stopped, the fly wheel effect of the rotor cage will used its stored energy to continuously remove hot air, obnoxious and corrosive gases, fumes, dust & smoke giving rise to ventilation. Suction is maintained at very low levels of wind velocity.
Convective thermal currents are given boost by venture dome to further enhance revolution of the Ventilator.
Cooler air from the outside will rush into the negative space in the building to maintain a condition of equilibrium. Stale hot air is always exhausted through the Fan, whereas fresh air only comes in through the openings in the building. The incoming outside air could be filtered by installing filters over the inlets. This is necessary in case of pharmaceutical & food processing industries.
Standard Sizes:
A. 24' (600 MM) Throat Dia
B. 21' (530 MM) Throat Dia
C. 22' (560 MM) Throat Dia
Areas of use:
Approx. Rs 20,000 / Piece Get Latest Price
Minimum Order Quantity | 10 Piece |
Material | Mild Steel (M.S.) & Aluminium (AL. |
Brand | Rhino Tuff |
Automatic Grade | Power Driven |
Electric Current Type | Direct Driven |
Shape | Cylindrical |
Air Volume | Up to 10,000 C.F.M. (exhaust capacity) |
Diameter | 590 mm & 690 mm |
Rhinotuff Motorized Roof Ventilation Systems are fixed over industrial as well as commercial roofs and are used for forced ventilation in the place of their installation.
They consist of an impeller- an Aerofoil Designed Aluminium Casted Fan, which is powered by an electric motor. The aero foil design of the Aluminium Blades helps improve their operational efficiency and performance. The Impeller which is balanced- both statically and dynamically, is fitted within a painted / powder coated cylindrical shaped M.S. casing of an appropriate diameter size. Each of the Aluminium Blade can be adjusted to control the air flow.
The impeller is covered at the top using a plastic or metallic cowl to protect it from rain water. A steel mesh, which is welded on the inside surface of the cowl helps keep birds and insects away. The Impeller along with its casing is fastened over a Plastic Base Plate (also called the Adapter), which can be manufactured in a profile / corrugation matching with that of the roof sheet. This ensures leakage proof and hassle free installation at sites. The Adapter allows the freedom of mounting the Roof Extractor to be mounted anywhere on the roof and not just at the ridge top.
Rhinotuff Motorized Roof Ventilation Systems can be fixed over flat or sloped roofs. They continuously exhaust hot air, gases, fumes, smoke and dust at a constant rate and have an exhaust capacity.
They are capable of withstanding a high wind speed and are guaranteed against leakage of rain water. In addition, these are highly effective, mechanically strong, impact resistant, relatively light weight, weather and storm proof, maintenance free, easily repairable, easy to install, adaptable to any roof and are economical to use.
Rhinotuff Motorized Roof Ventilation Systems commonly find use in process based industries, where there is a requirement for continuous ventilation and that too at a constant rate.
|
4.4/5
Rated by 5 Users