- Home
- ยป
- Our Products
- »
- Roof Ventilator
Roof Ventilator
Roof Air Vents
Minimum Order Quantity: 08 Piece
Product Brochure
Brand | Rhino Tuff |
Height | 16'' (400 MM) |
Weight | 4.0 Kilos (appx.) |
MOC Of Fins | Aluminium (AL.) & Stainless Steel (S.S.) |
Floor Area Covered | 500 Sq. Ft |
MOC Of Internal Fittings | Galvanized Iron (G.I.) |
MOC Of Top Cover and Bottom Ring | Stainless Steel (S.S.) |
Material Of Base Plates | F.R.P. & PC |
Material Options | Aluminium (AL.) & Stainless Steel (S.S.) |
Max Exhaust Capacity | 2700 C.F.M. |
Revolution Mechanism | Double Jet Sealed Ball Bearings |
Standard Sizes | Throat Dia- 21'' (500 MM) & 24'' (600 MM) |
Our RHINOTUFF Air Vent is a natural ventilation system, which helps create a healthy & congenial working environment by helping remove inside hot stale air & by facilitating entrance of outside fresh air.
It is a free spinning roof ventilator, which works by utilizing the Velocity Energy of wind to induce air flow through Centrifugal Action.
The Fan starts revolving due to the force of the outside breeze & the inside hot air. The Centrifugal Force (backward thrust) caused by the spinning vanes creates a region of low pressure, which draws and throws out air from below and causes fresh cool air from the outside to come in.
The slightest breeze will cause the Air Vents to spin. Even after the breeze has stopped, the fly wheel effect of the rotor cage will used its stored energy to continuously remove stale air, gases, fumes & smoke giving rise to ventilation. Suction is maintained at very low levels of wind velocity.
Convective thermal currents are given boost by venture dome to further enhance revolution of the Ventilator.
Cooler air from the outside will rush into the negative space in the building to maintain a condition of equilibrium. Stale hot air is always exhausted through the Air Vent, whereas fresh air only comes in through the openings in the building. The incoming outside air could be filtered by installing filters over the inlets. This is necessary in case of pharmaceutical & food processing industries.
Salient Features:
- Mechanically strong
- Impact resistant
- Light weight
- Effective round the year ventilation
- No running cost
- Power saving product
- Weather proof
- Storm & hail resistant
- Noise free
- Leakage proof
- Environment friendly
- Easy to install
- Adaptable to any kind of roofing
- Maintenance free & easily repairable, if required
- Durable & long lasting
- Entitled to depreciation at an accelerated rate under the present tax laws
Applications:
- Production Sheds
- Warehouses
- Production Utility Areas such as compressor rooms, D.G. set rooms, boiler rooms, paint shops etc.
- Packing Halls
- Commercial Buildings such as school, shopping malls, hotels, clubs, banquets etc.
- Infrastructure Facilities such as ports, airports etc
- Defence Establishments such as air bases, naval bases, arms depots etc
- Residential
Additional Information:
- Item Code: 664
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
- Port of Dispatch: Faridabad, Haryana
- Production Capacity: 50 sets / day
- Delivery Time: 1 Week
- Packaging Details: Corrugated Box with PP Packing
Wind Driven Roof Ventilators
Minimum Order Quantity: 08 Set
Product Brochure
Brand | 16'' |
Weight | 4 Kilos (appx.) |
Floor Area Covered | 500 Sq. Ft. |
Material Of Base Plates | FRP & PC |
Material Options | Aluminium & Stainless Steel |
Maximum Exhaust Capacity | 2700 C.F.M. |
Revolution Mechanism | Double Jet Sealed Ball Bearings |
Standard Sizes | Throat Dia- 21'' (500 MM) & 24'' (600 MM) |
MOC Of Fins | Aluminium or Stainless Steel |
MOC Of Top Cover and Bottom Ring | Stainless Steel (S.S.) |
Our Rhino Tuff Ventilators is a natural ventilation system, which helps create a healthy & congenial working environment by helping remove inside hot stale air & by facilitating entrance of outside fresh air.
It is a free spinning roof ventilator, which works by utilizing the velocity energy of wind to induce air flow through centrifugal action.
The Fan starts revolving due to the force of the outside breeze & the inside hot air. The centrifugal force (backward thrust) caused by the spinning vanes creates a region of low pressure, which draws and throws out air from below and causes fresh cool air from the outside to come in.
The slightest breeze will cause the Turbo Ventilators to spin. Even after the breeze has stopped, the fly wheel effect of the rotor cage will used its stored energy to continuously remove stale air, gases, fumes & smoke giving rise to ventilation. Suction is maintained at very low levels of wind velocity.
Convective thermal currents are given boost by venture dome to further enhance revolution of the Ventilator.
Cooler air from the outside will rush into the negative space in the building to maintain a condition of equilibrium. Stale hot air is always exhausted through the Fan, whereas fresh air only comes in through the openings in the building. The incoming outside air could be filtered by installing filters over the inlets. This is necessary in case of pharmaceutical & food processing industries.
Salient Features:
- Mechanically strong
- Impact resistant
- Light weight
- Effective round the year ventilation
- No running cost
- Power saving product
- Weather proof
- Storm & hail resistant
- Noise free
- Leakage proof
- Environment friendly
- Easy to install
- Adaptable to any kind of roofing
- Maintenance free & easily repairable, if required
- Durable & long lasting
- Entitled to depreciation at an accelerated rate under the present tax laws
Applications:
- Production Sheds
- Warehouses
- Production Utility Areas such as compressor rooms, D.G. set rooms, boiler rooms, paint shops etc.
- Packing Halls
- Commercial Buildings such as school, shopping malls, hotels, clubs, banquets etc.
- Infrastructure Facilities such as ports, airports etc
- Defence Establishments such as air bases, naval bases, arms depots etc
- Residential
Additional Information:
- Item Code: 656
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
- Port of Dispatch: Faridabad, Haryana
- Production Capacity: 50 sets / day
- Delivery Time: 01 Week
- Packaging Details: Corrugated Boxe & PP Packing
Roof Ventilators
Minimum Order Quantity: 08 Set
Brand | Rhino Tuff |
Fan Weight | 4.0 Kilos (appx.) |
Floor Area Covered | 500 Sq. Ft. (appx.) |
Fan Height | 16'' (400 MM) |
MOC Of Fins | Aluminium (AL.) or Stainless Steel (S.S.) |
MOC Of Internal Fittings | Galvanized Iron (G.I.) or Stainless Steel (S.S.) |
MOC Of Top Cover and Bottom Ring | Stainless Steel |
Material Of Base Plates | F.R.P. or PC |
Material Options | Aluminium (AL.) or Stainless Steel (S.S.) |
Max Exhaust Capacity | 2700 CFM |
Revolution Mechanism | Double Jet Sealed Ball Bearings |
Standard Sizes | Throat Dia- 21'' (500 MM) & 24'' (600 MM) |
Our RHINOTUFF Roof Ventilator is a natural ventilation system, which works on wind as well as pressure and temperature difference inside and outside the buildings.
It helps create a healthy & congenial work environment by helping remove inside hot stale air & by facilitating entrance of outside fresh air through the various openings in the shed. It is a free spinning roof ventilator, which works by utilizing the Velocity Energy of wind to induce air flow through Centrifugal Action.
The Fan starts revolving due to the force of the outside breeze & the inside hot air.
The Centrifugal Force (backward thrust) caused by the spinning vanes creates a region of low pressure, which draws and throws out air from below and causes fresh cool air from the outside to come in.
The slightest breeze will cause the Roof Ventilators to spin. Even after the breeze has stopped, the fly wheel effect of the rotor cage will used its stored energy to continuously remove stale air, corrosive and obnoxious gases and fumes & smoke giving rise to ventilation. Suction is maintained at very low levels of wind velocity.
Convective thermal currents are given boost by venture dome to further enhance revolution of the Ventilator.
Cooler air from the outside will rush into the negative space in the building to maintain a condition of equilibrium. Stale hot air is always exhausted through the Fan, whereas fresh air only comes in through the openings in the building. The incoming outside air could be filtered by installing filters over the inlets. This is necessary in case of pharmaceutical & food processing industries.
Their maximum exhaust capacity is 2700 C.F.M., but varies depending on the wind speed, stack height and the temperature difference inside and outside the building.
Standard Throat Dai Sizes:
A. 24'' (600 MM)
B. 21'' (530 MM)
C. 22'' (560 MM)
Available Variants:
1. Aluminium (AL.)
2. Stainless Steel (S.S.)
3. PP- S.S.
M.O.C. of Base Frames:
1. Fiberglass (F.R.P.)
2. Polycarbonate (PC)
3. Aluminium (AL.)
4. Stainless Steel (S.S.)
Salient Features:
- Mechanically strong
- Impact resistant
- Light weight
- Effective
- No running cost
- Power saving product
- Weather proof
- Storm & hail resistant
- Noise free
- Leakage proof
- Environment friendly
- Easy to install
- Adaptable to any kind of roofing
- Maintenance free & easily repairable, if required
- Durable & long lasting
- Entitled to depreciation at an accelerated rate under the present tax laws
Applications:
- Production Sheds
- Warehouses
- Production Utility Areas such as compressor rooms, D.G. set rooms, boiler rooms, paint
shops etc. - Packing Halls
- Commercial Buildings such as school, shopping malls, hotels, clubs, banquets etc.
- Infrastructure Facilities such as ports, airports etc
- Defence Establishments such as air bases, naval bases, arms depots etc
- Residential
- Any other
Additional Information:
- Item Code: 651
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
- Port of Dispatch: Faridabad, Haryana
- Production Capacity: 50 Pcs / Day
- Delivery Time: 1 Week
- Packaging Details: Corrugated Boxes & PP Packing
Roof Vents
Minimum Order Quantity: 08 Set
Product Brochure
Brand | Rhino Tuff |
Fan Weight | 4.0 Kilos (appx.) |
Floor Area Covered | 500 Sq. Ft. (appx.) |
Height | 16'' (400 MM) |
MOC of Fins | Aluminium (AL.) or Stainless Steel (S.S.) |
MOC of Internal Fittings | Galvanized Iron (GI) or Stainless Steel (SS) |
MOC of Top Cover and Bottom Ring | Stainless Steel (S.S.) |
Material Option | Aluminium (AL.) or Stainless Steel (S.S.) |
Material of Base Plate | FRP or PC |
Maximum Exhaust Capacity | 2700 C.F.M. |
Revolution Mechanism | Double Jet Sealed Ball Bearings |
Standard Size | Throat Dia- 21'' (500 MM) & 24'' (600 MM) |
It is a free spinning roof ventilator, which works by utilizing the velocity energy of wind to induce air flow through centrifugal action.
The Fan starts revolving due to the force of the outside breeze & the inside hot air. The centrifugal force (backward thrust) caused by the spinning vanes creates a region of low pressure, which draws and throws out air from below and causes fresh cool air from the outside to come in.
The slightest breeze will cause the Turbo Ventilators to spin. Even after the breeze has stopped, the fly wheel effect of the rotor cage will used its stored energy to continuously remove stale air, gases, fumes & smoke giving rise to ventilation. Suction is maintained at very low levels of wind velocity.
Convective thermal currents are given boost by venture dome to further enhance revolution of the Ventilator. Cooler air from the outside will rush into the negative space in the building to maintain a condition of equilibrium. Stale hot air is always exhausted through the Fan, whereas fresh air only comes in through the openings in the building. The incoming outside air could be filtered by installing filters over the inlets. This is necessary in case of pharmaceutical & food processing industries.
Salient Features:
- Mechanically strong
- Impact resistant
- Light weight
- Effective round the year ventilation
- No running cost
- Power saving product
- Weather proof
- Storm & hail resistant
- Noise free
- Leakage proof
- Environment friendly
- Easy to install
- Adaptable to any kind of roofing
- Maintenance free & easily repairable, if required
- Durable & long lasting
- Entitled to depreciation at an accelerated rate under the present tax laws
Applications:
- Production Sheds
- Warehouses
- Production Utility Areas such as compressor rooms, D.G. set rooms, boiler rooms, paint shops etc.
- Packing Halls
- Commercial Buildings such as school, shopping malls, hotels, clubs, banquets etc.
- Infrastructure Facilities such as ports, airports etc
- Defence Establishments such as air bases, naval bases, arms depots etc.
- Residential
Additional Information:
- Item Code: 660
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
- Port of Dispatch: Faridabad, Haryana
- Production Capacity: 50 sets/ day
- Delivery Time: 1 Week
- Packaging Details: Corrugatred Box & PP Packing