- Home
- ยป
- Our Products
- »
- Air Ventilator
Air Ventilator
Air Ventilator
Minimum Order Quantity: 08 Piece
Product Brochure
Material | Aluminium |
Brand | Rhino Tuff |
Neck Diameter | 21'' (500 MM) & 24'' (600 MM) |
Height | 16'' (400 MM) |
Ventilation | 2700 (max.) CFM |
MOC Of Top Cover and Bottom Ring | Stainless Steel |
MOC Of Fins | Aluminium or Stainless Steel |
Revolution Mechanism | Double Jet Sealed Ball Bearings |
RHINOTUFF Air Ventilator is a natural ventilation system, which works on wind as well as temperature and pressure difference.
It helps create a healthy, congenial & productive working environment by helping improve the air change rate in the place of installation.
It is a free spinning roof top ventilator, which works by utilizing the Velocity Energy of wind to induce air flow through Centrifugal Action.
The Ventilator starts revolving due to the force of the outside breeze & the pressure of the inside hot air. The Centrifugal Force (backward thrust) caused by the spinning vanes creates a region of low pressure, which draws and throws out air from below and causes fresh cool air from the outside to come in through the various openings in the building.
The slightest breeze will cause the Air Ventilators to spin. Even after the breeze has stopped, the fly wheel effect of the rotor cage will used its stored energy to continuously remove hot stale air, gases, fumes, dust & smoke giving rise to ventilation. Suction is maintained at very low levels of wind velocity.
Convective thermal currents are given boost by venture dome to further enhance revolution of the Ventilator.
Cooler air from the outside will rush into the negative space in the building to maintain an equilibrium. Stale hot air is always exhausted through the Fan, whereas fresh air only comes in through the openings in the building. The incoming outside air could be filtered by installing filters over the inlets. This is necessary in case of pharmaceutical & food processing industries.
Air Ventilators can be made available in Aluminium (AL.), Stainless Steel (S.S.) or a combination of Polypropylene (PP) & Stainless Steel (PP-SS). Standard throat dia sizes are 24'''', 22'''' & 21''''
The Base Frames can be made available in Fiberglass (F.R.P.), Polycarbonate, Aluminium or Stainless Steel. The F.R.P. & PC Base Frames are largely transparent, which allow natural light to pass through them and thereby provide natural illumination in the place of installation.
- Mechanically strong
- Impact resistant
- Light weight
- Effective round the year ventilation
- No running cost
- Power saving product
- Weather proof
- Storm & hail resistant
- Noise free
- Leakage proof
- Environment friendly
- Easy to install
- Adaptable to any kind of roofing
- Maintenance free & easily repairable, if required
- Durable & long lasting
- Entitled to depreciation at an accelerated rate under the present tax laws
Applications:
- Production Sheds
- Production Utility Areas
- Warehouses & Godowns
- Production Utility Areas such as compressor rooms, D.G. set rooms, boiler rooms, paint shops etc.
- Packing Halls
- Commercial Buildings such as school, shopping malls, hotels, clubs, banquets etc.
- Infrastructure Facilities such as ports, airports etc
- Defence Establishments such as air bases, naval bases, arms depots etc
- Residential
Additional Information:
- Item Code: 652
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
- Port of Dispatch: Faridabad, Haryana
- Production Capacity: 50 Pcs / Day
- Delivery Time: 1-2 weeks
- Packaging Details: Corrugated Box & PP Packing
FRP Air Ventilator
Minimum Order Quantity: 08 Set
Product Brochure
Brand | Rhino Tuff |
Weight | 4.0 Kilos (appx.) |
Material Of Base Plates | F.R.P. or PC |
MOC Of Internal Fittings | Galvanized Iron (G.I.) |
Floor Area Covered | 500 Sq. Ft. |
MOC Of Top Cover and Bottom Ring | Stainless Steel (S.S.) |
Standard Size | Throat Dia- 21'' (500 MM) & 24'' (600 MM) |
Revolution Mechanism | Double Jet Sealed Ball Bearings |
Max Exhaust Capacity | 2700 C.F.M. |
MOC Of Fins | Aluminium (AL.) or Stainless Steel (S.S.) |
Height | 16" (400 MM) |
Material Options | Aluminium (AL.) & Stainless Steel (S.S.) |
Our Rhino Tuff Ventilators is a natural ventilation system, which helps create a healthy & congenial working environment by helping remove inside hot stale air & by facilitating entrance of outside fresh air.
It is a free spinning roof ventilator, which works by utilizing the velocity energy of wind to induce air flow through centrifugal action.
The Fan starts revolving due to the force of the outside breeze & the inside hot air. The centrifugal force (backward thrust) caused by the spinning vanes creates a region of low pressure, which draws and throws out air from below and causes fresh cool air from the outside to come in.
The slightest breeze will cause the Turbo Ventilators to spin. Even after the breeze has stopped, the fly wheel effect of the rotor cage will used its stored energy to continuously remove stale air, gases, fumes & smoke giving rise to ventilation. Suction is maintained at very low levels of wind velocity.
Convective thermal currents are given boost by venture dome to further enhance revolution of the Ventilator.
Cooler air from the outside will rush into the negative space in the building to maintain a condition of equilibrium. Stale hot air is always exhausted through the Fan, whereas fresh air only comes in through the openings in the building. The incoming outside air could be filtered by installing filters over the inlets. This is necessary in case of pharmaceutical & food processing industries.
Salient Features:
- Mechanically strong
- Impact resistant
- Light weight
- Effective round the year ventilation
- No running cost
- Power saving product
- Weather proof
- Storm & hail resistant
- Noise free
- Leakage proof
- Environment friendly
- Easy to install
- Adaptable to any kind of roofing
- Maintenance free & easily repairable, if required
- Durable & long lasting
- Entitled to depreciation at an accelerated rate under the present tax laws
Applications:
- Production Sheds
- Warehouses
- Production Utility Areas such as compressor rooms, D.G. set rooms, boiler rooms, paint shops etc.
- Packing Halls
- Commercial Buildings such as school, shopping malls, hotels, clubs, banquets etc.
- Infrastructure Facilities such as ports, airports etc
- Defence Establishments such as air bases, naval bases, arms depots etc
- Residential
Additional Information:
- Item Code: 663
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
- Port of Dispatch: Faridabad, Haryana
- Production Capacity: 50 sets / day
- Delivery Time: 1 Week
- Packaging Details: Corrugated Box & PP Packing
Roof Extractor Fan
Weight | 4 Kilos (appx) |
Brand | Rhino Tuff |
Floor Area Covered | 500 Sq. Ft. |
MOC Of Fins | Aluminium or Stainless Steel |
Material Of Base Plates | FRP & PC |